Easy ways to fix Epson Printer Error Code 0x10

Just like a human body falls sick, in the same way your machinery can face issues too. If you own a printer then it is natural that you will face some errors as well. Epson Printer Error Code 0x10 is one of the most common errors faced by users. However, you don’t need to worry as it can be fixed easily. If you are facing this error then it means that the scanner of the printer is out of order.

Top 5 Causes of Epson Printer Error Code

If you are facing Epson Printer Error Code 0x10 then it could be because of the following reasons-

1.     The logic board might be facing a failure or the scan head assembly might be jammed giving rise to Epson Printer Error Code 0x10

2.     The scanning process could be hindered due to some particles stuck in the printer

3.     Epson Printer Error Code 0x10 could also be there because of some hardware issue

4.     There is a slight possibility that your scanner is defective and you are unable to use it

5.     You might not have the proper drivers installed which are compatible with your printer

 

Top 3 methods to fix Epson Printer Error Code 0x10 

We have compiled a list of easiest way to fix Epson Printer Error Code 0x10. Follow the below mentioned steps and get rid of the error!

 

Method 1- Check your printer for dust particles

You might want to lift the cover of the scanner and check for any stuck bits of paper or some dust particles. Clean the space thoroughly or you might mess up the printer. Be very cautious while removing any dirt from the scanner area or it might have some fatal effects. Restart your printer and if it was because of the dust particles then it will work smoothly. If you continue facing Epson Printer Error Code 0x10 then you might want to reset the printer.

 

Method 2- Reset the printer

Follow the below mentioned steps to reset the printer-

ü Disconnect the Epson printer from the main power source

ü Wait for few seconds

ü Press and hold the power button of the printer for 50-60 seconds

ü Reconnect the printer to the power source

ü Restart your printer and try to scan a document

ü You will be good to go

If you still face Epson Printer Error Code 0x10 then try the following method.

 

Method 3- Reinstall the drivers

 

Epson Printer Error Code 0x10 could be fixed by changing the drivers. Refer to the below steps-

ü Turn on your laptop and printer and make sure they are connected

ü Set your laptop’s settings to ‘Automatically download the driver software’

ü Go to control panel and search for ‘Installation settings’

ü Choose ‘change device installation settings’ and follow the on screen instructions and then click on ‘Yes’ to save changes

ü Let windows search for a compatible driver once the printer is connected

ü Once the apt driver is automatically installed, you will get rid of the issue.

 

View Source: https://epsonprintersupportpro2020.wordpress.com/2020/08/19/epson-printer-error-code-0x10/