How to Epson EcoTank Refill Ink for Smooth and Long Printing

If you are using Epson EcoTank printers, you must be aware of the built-in tank in these printers. It supplies ink to the printhead. You must manually refill the tank via an ink bottle when the device has low ink levels. So, you must know about EcoTank refill ink. The ink bottles are quite cost-effective than conventional printer ink cartridges. If you know the correct process of refilling ink tanks, you can save a lot of dollars and print thousands of pages. In this article, you'll find the process to refill inks in your Epson printer.

 

What You Should Know About the Epson EcoTank Refill Ink Process

There are four 502 ink bottles in Epson Expression ET-2700 EcoTank. These ink bottles are in magenta, cyan, black, and yellow colors. The black ink bottle can print around 7500 pages, and the other colored ink bottles can print approximately 6000 pages. 

 

There's no need to keep the levels of all the four ink tanks entirely up to the brim at all times. However, it is also not wise to let the levels get too low. You should carry out Epson EcoTank ink refills only if the ink levels get to the lowest line on the tank display. When you notice this level of ink, it's time to conduct a refill. 

 

Steps for the Epson EcoTank Refill Ink Process

Before beginning the process, you must have Epson EcoTank refill ink bottles with you. You can utilize the product even if one or more tanks aren't filled fully. But for highly accurate ink level tracking, you must fill the tanks to the top. Here are the steps you should follow.

 

• Position a paper below the ink tank unit because the ink can splatter.

• Switch on the product and ensure that the power light is on. 

• You may notice a message on the screen prompting you to reset ink levels. You must note down the tanks that require to be refilled and hit 'OK.'

• If not, choose 'Setup' followed by 'Maintenance' and then 'Reset Ink Levels.' Then hit the 'Start' button.

• Now open the cover of the ink tank unit and take away the tank cap. Keep it in the holder. 

• Snap away the bottle cap's tip. You can use it to close the bottle cap later.

• Remove the bottle cap and then the protective seal of the Epson EcoTank refill inks. Now close the lid properly.

• Refill the tank with proper color ink. Refill it till the upper line on it. If you find any residual ink in the bottle after filling your tank, keep its tap tip safely on the bottle cap and store the ink so you can use it later.

• Now replace the cap securely.

• To refill every tank, repeat the steps till now.

• Now, close the cover of the ink tank.

• Hit the 'OK' button. A screen to choose the colors you refilled will appear. 

• Hit the arrow buttons to emphasize the tank you've filled and hit 'OK.' Do it for every ink tank color you refilled.

• Lastly, to reset the ink levels, hit the 'Start' button.

 

Final Words

Now that you know the process of Epson EcoTank refill ink, you can implement it whenever the ink levels go low. Just read and follow the instructions carefully, and don't let the ink leak from the bottle. Feel free to connect with professional Epson printer support services for further assistance.